Tire & Wheel Packages at
PLEASE NOTE: We are a
full line dealer for
Call us today for pricing
- Alloy USA
- American Racing
- BFGoodrich Tires
- Doetsch Tech
- Goodyear Tires
- Interco Tires
- JKS Mfg.
- Precision Gear
- Rough Country
- Tom Wood's Custom
12906 Ventura Court
Shakopee, MN 55379
Almost Alloy Kit
Quantity in Basket:
Shipping Weight: 1.00 pounds
In Stock - NEW LOW PRICE!!! Was $49.99, now $29.99
Front Axle Shaft Failure and how to ELIMINATE it:
The Problem...Four steps to axle shaft failure when equipped with the 5-760X u-joint:
The Solution... Exclusively from Iron Rock Off Road...The Almost Alloy:
- The axleshaft is overloaded with 33" or larger tires and lockers.
- The "ears" on the axle shaft flex creating an ob-round (oval) shape around the u-joint cap.
- The u-joint cap breaks away at the retaining clip, causing the clip to fall off.
- The u-joint cap works its way out of the axle shaft causing catastrophic axle shaft failure.
We Provide you with a plate to weld in over the top of each u-joint cap.
This plate eliminates flex in the axle shaft "ears" around the u-joint cap.
This plate positively retains the u-joint cap, meaning failure is not an option.
This kit will make your axle shafts stronger than Spicer 297X and 760X u-joints.
It is still possible to see an axle shaft failure, but ONLY after u-joint failure.
We have had great results using this kit on our shop XJ with very heavy 35 x 13.5 Krawlers and a fairly aggressive driving style.
We use OEM Dana axle shafts, Spicer 760X u-joints, and our Almost Alloy Kit and we have not been able to break an axle shaft or u-joint yet!
The unbelievably low price: $29.99 gets you the full 8 piece kit to upgrade both front axle shafts.
What it fits:
Any vehicle with the 5-760X front axle u-joint as long as there is 1/8"+ clearance around the u-joint caps.
All 95 and newer Jeep vehicles including XJ Cherokees.
1984-1994 Jeep Cherokees with upgraded front axle shafts.
Most older Jeep Vehicles.
All Dana 44 front axles.
Most Dana 30 front axles.
Most 1/2 or 3/4 ton solid front axle Chevrolet, Ford, or Dodge vehicles.
We highly recommend installing a new Spicer 5-760X or stronger u-joint at the time of installation. Replacing the u-joint
(if ever required) will require cutting the Almost Alloy plates off the axle shaft (not difficult using the right tool, such
as an air cut-off or angle grinder with cutting disc).
Need these for your Dana 60 or other application? Send us an e-mail, if there is interest we'll design them.
Click on thumbnails for larger