Replaces driver or passenger upper control arm bushing on your front axle.
FITMENT
- Dana 30
- Dana 44
JK Dana 30 & 44, use 10679
PRODUCT FEATURES AND BENEFITS
- REPLACE STOCK BUSHINGS - You can use these cartridges in your factory upper control arms, IRO control arms, other manufacturer's arms that use factory style rubber bushings, and even your upper control arm mounts on your front axle! Our installation tool makes it easy!
- 2" MOUNTING WIDTH - Bolts directly into most Jeep upper control arm mounts 30° TOTAL MISALIGNMENT - Far more than most other competitor's joints. We haven't found one with more articulation yet.
- UHMW BEARING RACES - The choice we made to use this material was simple. Here is the wikipedia definition so you know why: Ultra-high-molecular-weight polyethylene (UHMWPE or sometimes shortened to UHMW), also known as high-modulus polyethylene (HMPE) or high-performance polyethylene (HPPE), is a subset of the thermoplastic polyethylene. It has extremely long chains, with molecular weight numbering in the millions, usually between 2 and 6 million. The longer chain serves to transfer load more effectively to the polymer backbone by strengthening intermolecular interactions. This results in a very tough material, with the highest impact strength of any thermoplastic presently made. It is highly resistant to corrosive chemicals, with exception of oxidizing acids. It has extremely low moisture absorption, has a very low coefficient of friction, is self-lubricating, and is highly resistant to abrasion (15 times more resistant to abrasion than carbon steel). Its coefficient of friction is significantly lower than that of nylon and acetal, and is comparable to that of Teflon, but UHMWPE has better abrasion resistance than Teflon. It is odorless, tasteless, and nontoxic.
- NO SNAP RINGS - This joint bolts together withoutthe use of snap rings or threaded jam nuts.
- NO SPECIAL TOOLS REQUIRED - No spanner wrench or custom tool is needed to assemble or maintain these joints
- INCREDIBLE STRENGTH - Easily with stands the highaxial loads of triangulated link suspensions.
- FULLY REBUILDABLE - Simple and inexpensive to rebuild.This is the last joint you'll ever have to buy.