Filters

Secure Checkout
Your Shopping Cart Is Empty

Secure Checkout

CODE: 14700 JT 5" Rock-Link Long Arm Lift Kit


JT 5" Rock-Link Long Arm Lift Kit
Purchase JT 5" Rock-Link Long Arm Lift Kit
  • CODE: 14700 JT 5" Rock-Link Long Arm Lift Kit

  • Kit Loading

  • Kit Products

    Choose Your Shocks *

      Choose Your Front Sway Bar Link *

        Choose Your Rear Lower Control Arms *

          Choose Your Rear Upper Control Arms *

            Choose Your Front Track Bar *

              Choose Your Rear Track Bar *


                 

              ***BILSTEIN SHOCKS ARE IN LIMITED SUPPLY.  BACKORDERS MAY OCCUR.***


              Born from the long lineage of the IRO long arm tradition. Look no further for the first, front-only, long arm lift kit for the JT Gladiator, the Rock-Link 5" lift kit.

                Experience your Gladiator, refined. It's a Jeep, but that doesn't mean it has to ride like a lumber wagon. The Rock-Link delivers an instant seat of the pants improvement in ride quality. But that's not all! Out on the trail, the improvement in ride quality translates to a more enjoyable off road experience. The longer arms in this system link your axle to the frame at a much lower operating angle than short arms at the same lift height. By decreasing that angle and increasing the length of the arms, the impact of the terrain is more easily absorbed by the suspension. These improvements over short arms greatly reduce the transmission of shock loads though the frame causing discomfort in the driver's seat, and reduces accelerated wear and stress on other suspension components. Longer arms allow for huge articulation over larger obstacles while keeping the axle centered in the fender openings. This articulation keeps your tires on terra firma, which translates into more traction. When comparing an otherwise equally equipped vehicle that has short arms, the Rock-Link equipped one will take you farther.

                  This kit is not just for rock crawlers! Maybe you aren't going to tackle Chocolate Thunder or Pritchett Canyon, but you are going to crush the REI parking lot, or turn every head while pulling up to your kid's campout. This Rock-Link lift kit delivers a true ride quality improvement for your daily driver that you can be proud of. Are you tired of your JT tracking wildly down the highway? The built in adjustments will give you everything you need to dial it in to perfection. Even stock JT's are setup with minimal caster from the factory, so get your alignment right once and for all with the Rock-Link.

                  At IRO, we have been perfecting long arm systems since 2004, making them even better with each new product release. We have learned that subtle changes to the geometry will make significant improvements to your driving experience. We have applied all these important refinements to the JT platform. We learned that the biggest improvement in ride quality and off road performance comes with a FRONT long arm system. When looking at what this Rock-Link offers versus the cost, we challenge you to find a suspension system that will take your Gladiator Beyond Boundaries at a price that is even close.

                  Note: Rubicon models use 1in taller springs from the factory.  This kit will net 4in of lift on Rubicon models.


                    Kit Features
                  • Lower arms are 2"x5/16" wall D.O.M. - Thickest on the market
                  • All 1/4" steel bracketry - CNC laser cut and formed
                  • Huge 1.25" thread adjusting male ends with 3" of useable adjustment, that's far more than any competitor.
                  • No jam nuts
                  • Combination of flex joints and rubber bushings in control arms for flex and comfort
                  • Fully adjustable caster/pinion angles
                  • Bolt in design
                  • Made in the USA!
                  • Lifetime Warranty

                    Kit Includes
                    • Front 4-Link long arms
                      • Front and rear 5" multi-rate lift coil springs
                      • Shock absorbers
                      • Front adjustable bumpstop extensions
                      • Heavy Duty front and rear adjustable track bars
                        • Extended length HD front and rear sway bar links
                          • All required hardware 
                            • Installation Instructions

                                      Product Fitment Notes
                                    • Fits 3.6 V6, and EcoDiesel
                                    • Requires removal of factory control arm mounts in the front
                                    • Requires drilling

                                    Recommended tire size: 37"x12.50" – or metric equivalent 
                                    Recommended wheel backspacing: 4.5"

                                    TRIMMING MAY BE REQUIRED
                                    Larger tire sizes possible with bumper/fender trimming and/or extended bump stops.


                                    Estimated Installation Time: 10-12hrs

                                    Difficulty Level: 3


                                    Difficulty Legend

                                    1 - Kit includes basic components.

                                    2 - Kit includes little to no adjustable components.

                                    3 - Kit includes many adjustable components; may require drilling/cutting.

                                    4 - Kit includes many adjustable components; requires welding; may require drilling/cutting.


                                    NOTE - Labor Time and Difficulty Level assumes vehicle and/or hardware is in good condition.





                                    Customer Ratings & Reviews

                                    Be the first to rate this item!

                                    Write Review

                                    Prop 65 Warning: CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov