32 Spline Slip Yoke Eliminator Kit

32 Spline Slip Yoke Eliminator Kit
    Code: 10109
    Weight: 5.00 pounds
    Rating: Not Yet Rated | Write the First Review
    Add To Wishlist

    MSRP: $199.99 

    Your search ends here.  This slip yoke eliminator kit will work on most modern New Process transfer cases with a 32 spline rear output shaft.  

    o    Do you want to run a tall lift without vibrations?

    o    Does your lifted vehicle have a vibration during accelerating or when driving at highway speeds?

    o    Do you need a slip yoke eliminator to ensure vibration free highway driving?

    o    Do you hate transfer case drops because they solve vibrations, but rob ground clearance?

    o    Do you want to add 1" more ground clearance under the belly of your vehicle where you need it most?

    o    Did your lift kit come with plastic transfer case drop spacers and you're a little nervous about that?

    o    Do you just hate slip yokes?

    o    Are you on a tight budget?


    If you answered yes to any of these questions, then once again Iron Rock Off Road has the perfect solution for you: our slip yoke eliminator kit for most modern 32 spline Jeep, Chevy, Dodge, or Ford 32 spline output transfer cases. We have put together a budget friendly solution to your driveline vibrations. With this kit, we provide a new yoke for your transfer case, billet aluminum seal housing, mounting hardware, and step by step installation instructions. Installation takes only 1-2 hours and does not require opening your transfer case.

    Why do you need this kit?

    1. Cures driveline vibration caused by lifting a vehicle higher than stock.
    2. Allows you to remove your transfer case drop, gaining you 1" of ground clearance or more, right where you need it most! This also moves your transfer case further away from trail damage and allows you to raise your t-case skid plate (if equipped).
    3. Great for running a lower lift heights to avoid dropping your transfer case.
    4. Wow, it's so inexpensive!
    5. Great for tall lift kits where a transfer case drop just isn't enough.
    6. Installation takes just a few hours!
    7. It just plain works great!
    8. It allows you to use a double cardan style driveshaft.

    Kit includes:

    o    Heavy Duty 32 spline fixed "hack and tap" style yoke machined to fit a 1310 double cardan CV driveshaft (sold separately).

    o    Billet seal housing, anodized for a durable finish

    o    Output seal and all required hardware

    o    Installation Instructions



    o    242HD

    o    241DHD

    o    241C

    o    Other Dodge, Chevy, Ford and other 241’s.   Please call us with some dimensions to confirm fitment.

    o    Other 32 spline cases we have not tested!  If you have an application you think this will work for, we want to know about it!



    NOTE: A custom driveshaft can be ordered right along with this SYE to complete the setup. If you choose the option to add the driveshaft, we will ship the SYE first and wait for you to install it and supply us with the required length for the shaft. Please contact us if you have any questions beforehand

    Estimated Installation Time: 2hrs

    Difficulty Level: 2

    Difficulty Legend

    1 - Kit includes basic components.

    2 - Kit includes little to no adjustable components.

    3 - Kit includes many adjustable components; may require drilling/cutting.

    4 - Kit includes many adjustable components; requires welding; may require drilling/cutting.

    NOTE - Labor Time and Difficulty Level assumes vehicle and/or hardware is in good condition.

    Customer Ratings & Reviews

    Be the first to rate this item!

    Write Review

    Prop 65 Warning: CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov