Filters

Secure Checkout
Your Shopping Cart Is Empty

Secure Checkout

CODE: 15829 WJ 1 Ton OTK Steering System


WJ 1 Ton OTK Steering System
Purchase WJ 1 Ton OTK Steering System
  • CODE: 15829 WJ 1 Ton OTK Steering System

  • Kit Loading


  • Kit Products

    Choose Your Steering Stabilizer *


    WJ 1-Ton Over-the-Knuckle Steering System

    Upgrade your lifted Jeep Grand Cherokee WJ with the Iron Rock Off Road 1-Ton Over-the-Knuckle (OTK) Steering System. This heavy-duty steering system combines a redesigned track bar mounting solution, flipped drag link geometry, and oversized steering components to address common steering geometry challenges associated with lifted WJs.

    The Challenge: Steering Geometry on Lifted WJs

    The factory steering and track bar geometry on the Jeep Grand Cherokee WJ can contribute to unwanted steering behavior when the vehicle is lifted. Even with new steering components, tight bushings, and a proper alignment, some lifted WJs may experience wandering or poor handling due to the resulting steering geometry.

    The Solution

    The IRO 1-Ton OTK Steering System is designed to improve steering geometry while upgrading the strength and durability of the steering linkages. Its track bar drop crossmember and flipped drag link keep the track bar and drag link angles closely matched, reducing geometry-related bump steer. Heavy-duty Trail Titan steering components complete the system.

    Key Features

    • Heavy-duty track bar drop crossmember: Lowers the frame-side track bar mounting point by approximately 3" compared with the factory location. The bolt-in crossmember extends beneath the oil pan to the opposite side of the uniframe, providing additional structural support. Constructed from laser-cut and CNC-formed 1/4" steel.

    • Maintains full-length track bar: Retains the full-length track bar to help preserve balanced axle movement through the suspension cycle.

    • Flipped drag link geometry: Raises the drag link at the steering knuckle to better match the revised track bar angle and remedy bump steer.

    • Heavy-duty over-the-knuckle tie rod: Built from 1-1/2" diameter, 3/8"-wall DOM steel tubing for a substantial steering linkage upgrade.

    • Trail Titan 1-ton tie rod ends: Feature large 1-ton ball studs and thick forged housings. Chrome-plated ball studs and zinc-nickel-plated housings provide corrosion-resistant finishes.

    • Integrated anti-flop design: Helps keep the steering components positioned as intended.

    • Double adjusters: Allow steering linkage adjustments during alignment without removing the rod ends.

    • Clamping-bolt adjustment: Uses clamping bolts rather than traditional jam nuts.

    • Bolt-in crossmember: Includes the hardware needed to install the track bar drop crossmember.

    Kit Includes

    • Track bar drop crossmember

    • 1-1/2" diameter, 3/8"-wall DOM steering linkages

    • Trail Titan 1-ton tie rod ends

    • Flipped drag link configuration

    • Double-adjuster hardware

    • Clamping bolts

    • Tapered reamer for the required steering-knuckle modification when installing in the OTK configuration

    • Necessary installation hardware

    Fitment Requirements and Wheel Clearance

    Minimum 4" suspension lift required.

    • Steering-knuckle modification: For OTK installation, the steering knuckle must be reamed to accommodate the tie rod end's tapered stud. A tapered reamer is included for this modification. Follow the installation instructions carefully.

    • Track bar: Must have a forward differential-clearance bend to provide the necessary clearance with this system.

    • Aftermarket 17" wheels: Wheels with 4.5" of backspacing or less are recommended for under-the-knuckle (UTK) configurations and required for OTK configurations.

    • Factory 17" WJ and JK wheels: Require wheel spacers at least 1" thick.

    • 15" steel wheels: Require a maximum backspacing of 3.75" for OTK clearance. Confirm actual wheel, brake, and steering clearance before installation.

    Replacement and Service Parts

    Installation Instructions

    View the WJ 1-Ton HD Steering Kit Installation Instructions (PDF)

    Important: Verify lift height, track bar clearance, and wheel backspacing before ordering. Steering geometry and wheel clearance vary with vehicle setup and installed components.

    Estimated Installation Time: 3-4hrs

    Difficulty Level: 3


    Difficulty Legend

    1 - Kit includes basic components.

    2 - Kit includes little to no adjustable components.

    3 - Kit includes many adjustable components; may require drilling/cutting.

    4 - Kit includes many adjustable components; requires welding; may require drilling/cutting.


    NOTE - Labor Time and Difficulty Level assumes vehicle and/or hardware is in good condition.

    Customer Ratings & Reviews

    Be the first to rate this item!

    Write Review

    Prop 65 Warning: CALIFORNIA WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov