Why would you want to do this swap?
- It's a Mammoth strength upgrade (especially the D44). Your Dana 30 ring gear is 7.12". The JK 30 is 7.56" with a larger carrier and bearings and the JK 44 is 8.5" with an even larger carrier.
- Larger/stronger unit bearings and knuckles
- Huge braking upgrade
- 5" width gain for better stability and lower center of gravity
- High pinion differentials deliver huge driveshaft angle reduction when compared to standard Dana 30 low pinion axles
Key Product Features:
- Coil pad locations optimized for the XJ/ZJ/TJ/LJ/MJ
- Integrated coil retainer plates
- High strength/low profile C to C truss
- Upper and lower C gussets
- Combination of 3/16",1/4", and 3/8" thick plate steel
- Tab and slot construction for easy assembly
- Shock mounts are moved outboard and eliminate bar pins
- Lower control arm brackets are super high clearance, tucked up to the bottom of the main axle tube
Key Product Notes:
- This swap requires a custom track bar and steering drag link
- Requires 5 on 5 wheels or wheel spacer adapters and 17" diameter wheels (we have fit some 16s)
- Works with short arm kits, and IRO ROCK-LINK long arm kits.
- 3" lift or higher recommended for best fit